VVDI BIMTOOL Pro Using Notice:

1. Please don't use the Internet Port and USB Port at the same time.
For FEM/BDC Programming using the USB Port connect is ok; Others Programming you can connect the Internet Port.
2. When connect the port with PC, first it will display"Booting", after 20 secs it will display as "BMW", then it means the connect ok.

Highlights

1. Add Ethernet Port 
Aside of USB port, which will speed up the programming / coding, usually it will only take several minutes instead of dozens of hours when using the USB cable.
2. Add Wifi Connection (WIFI 802.1b/g, 150 Mbps high-speed connection, and WIFI OTA upgrade)
When upgrading the machine firmware, you can connect the WIFI.
3. Operating System: Compatible with WIN7 8 10 etc, no computer operation system limitation.
Free Download V1.6.2 VVDI BMW Tool Software
4. Language: English, Italian, Spanish, Deutsch, Hungarian, Polish etc.
5. Support BMW ECU Programming(NBT/CIC), BMW E-Sys and Rhelngold Diagnostic System, able to replace the specialized devices, and greatly speed up the F/G Classis Programming.
(Being connected via the network cable)
6. Support DolP Vehicle/ Module Programming
7. Support directly read ISN data without disassembling the ECU (N13/N20/N55/N63)

Xhorse VVDI BIMTool Pro Functions:

http://www.gocardiag.com/blog/2021/04/01/xhorse-vvdi-bimtool-pro-functions/

BMW BIMTool Pro E /F Chassis Programming & Coding:

●Program / Code BMW Exx 
1. Connect Car 
Can auto detect vehicle model, read module information, support chassis: E36, E38, E39, E46, E52, E53, E60, E63, E64, E65, E66, E67, E70, E71, E72, E83, E85, E86, E89, E90, E91, E92, E93, K1X, K24, KH2, R50, R52, R53, R55, R56, R57,
RR1,.etc chassis 

2. Read and write Vehicle configuration(FA/FP) 
Can read the configuration information inside of vehicle module, and to change the vehicle configuration information for replacing second-hand module.

3. Registered unit information from gateway / Calculate adaptive control unit
Read registered unit information from gateway
Calculate adaptive control unit-calculate all control units of the current vehicle based on configuration information

4. Module information/DTCs 
Read the specific information of selected module, then read and clear DTCs .,etc

5. Unit coding 
Read the coding information of selected unit, save coding, load coding, write coding and  calculate the default coding based on the vehicle configuration information etc. 
 

6. Module programming 
According to the hardware version number and ZB version number in the current module, search for the supported programming files and perform programming functions
 

●Program / Code Fxx / Gxx 
1. Connect to car 
Auto detect vehicle model, and read the information inside of module. 

2. Read & write vehicle configuration(FA/FP) 
Can read the vehicle configuration information inside of module, and change the vehicle configuration information for replacing second hand module.
3. Read / Clear DTCs 
Can read and clear DTCs for vehicle maintenance. 
4. Vehicle coding 
Can read out the coding information inside of module, the user can change the corresponding value as required to realize some configuration functions. 
 

Features:
1). Read the coding: read the code information in the module
2). Save coding file: Save the coding information to a file
3). Load coding file: Load the coding file that is saved. 
4). Calculate the default coding: If the default coding of module is lost, it will be calculated according to the vehicle configuration information
5). Write coding: write the coding to the module
6). Hide function: We have re-organized some of the frequently-used configuration changes option, see the figure below:

5. Vehicle programming 
From vehicle configuration information to calculate the related module flash information, and write to module.
 

BMW BIMTool Pro Gearbox (Clear and Reset):

Function description: 
1. Read gearbox status: Support read 8HP gearbox status, module is brand new or not,.etc 
2. Backup Coding: Backup gearbox coding 
3. Restore Coding: Restore gearbox coding 
4. Clear Gearboxs ISN: Support clear 2nd-hand used gearbox all inside information, let this module become as brand new 
5. Reset adaption information: Reset gearbox inside adaption information, let it back to original status 

VVDI BIMTOOL Pro, VVDI BMW Tool and VVDI2 Comparison Table:
 

	VVDI BIMTOOLPro	VVDI BMW Tool	VVDI2
Image
Functions	Locksmith, Programming, Coding	Locksmith, Programming, Coding	Locksmith
Update	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free	Software Online for free Firmware use "update kit" update for free
Support Programming System	EWS to CAS (1, 2, 3, 3++ 4,4+) and the latest FEM/BDC system	EWS to CAS (1, 2, 3, 3++ 4,4+) and the latest FEM/BDC system	EWS to CAS (1, 2, 3, 3++ 4,4+)
Progrogramming Function	Support Can and DOIP	Support Can	No

 COMBINATION SHOW

Package List:

1pc x VVDI BIMTool Pro Main Unit

1pc x OBD Cable
1pc x Ethernet Cable
1pc x USB Cable
1pc x ECU Reflash Cable
1pc x Plastic Box

Whatsapp: +86-18033448663
Email: gocardiag@yeah.net
Skype: car.diag1