VVDI PROG Programmer

Latest Version:V4.9.7

Firmware Version:2.0.0

VVDI PROG latest software version V4.9.7 update(2020-11-23)

 

Language:

English,Arabic,Cezch,French,Italian,Polish,Portuguese,Russian,Spanish,Turkish,Chinese

 

 

Highlights:

1. The built-in update software allows user to update VVDIProg firmware timely.

2. High-speed USB communication interface enable the software automatically connect.

3. Smart operation mode: the possible causes of error will be listed

4. Reserve ports: for future update.

5. The self-test function enable you check if the machine works well.

6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.

 

 

 

Supported models：

VVDI Prog Programmer Supported Type List:

Memory:

ATMEL, CATALYST,EXEL,FAIRCHILD,INTEL,MICROCHIP,MITSUBISHI,ST,TOSHIBA,XICOR

MCU:

RENESAS V850,RENESAS H8X,RENESAS R8C,MOTOROLA MC68HC(9)08,MOTOROLA MC68HC(9)12 MOTOROLA MC9S08,MOTOROLA MC9S12,NXP PCF79XX,ST ST10F,INFINEON XC2XXX,ATMEL,ATMEGA XXXX, INFINEON XC164CS,MICROCHIP PIC18F

 

VVDI Prog Programmer Support Model List:

ECU List:

for BMW E Series,for BMW F Series,for BOMBARDIER,for CHANGAN,for DELPHI,for MAGNETI,for MARELLI,for RENAULT,OTHER

 

IMMOBILIZER List：

for AUDI,for BENZ,for BMW,for BUCIK,for CHEVROLET,for STEC,for CHRYSLER,for FIAT,for FORD,for GREATWALL,for INFINITI,for LANDROVER, for JAGUAR,for NISSAN,for OPEL,for PORSCHE,for RENAULT,for SAICMOTOR,for VOLKSWAGEN,for ZHONGHUA.

 

DASHBOARD List:

for BUICK,for CHANGAN,for CHERY,for CHEVROLET,for DONGFENG,for FAW,for FORD,for GEELY,for GREATWALL,for HAFEI,for TOYOTA, for HANTENG,for HAIMA,for HONDA,for JAC,for JAGUAR,for JINBEI,for JMC,for LUXGEN,for NISSAN,for SGMW,for VOLOVO,for ZHONGHUA,for ZOTYE

 

REMOTE List:

for BMW E Series,for BMW F Series

 

 

 

Functions:

1. Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series,MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series and most eeprom chips

2. Support chip data verify, check blank function

3. Support data file compare function

4. Support R&W BMW N20, N55 ECU ( show ISN directly )

5. Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)

6. Support renew PCF79XX remote, currently support BMW E/F series

7. Lots of connection diagram

 

 

VVDI PROG Connection for Maybach:

VVDI Prog Connection for Sprinter:
 

 

COMBINATION SHOW

 

Package List:

1pc x Programmer multiplexer    

1pc x Square USB cable   

1pc x SOP16 test socket      

1pc x 16pin converter (Support SOP/SOT/SSOP)

1pc x MCU reflash cable               

1pc x ECU reflash cable

1pc x MC9S12 reflash cable (Used to program MC9S12 series chip)

 

 

MOTHERBOARD

 

 

This function require internet support
Click the "Upgrade" button enter the upgrade interface, show as following picture

Enter update interface, if software show ”communication with server failed”,please close your Anti-virus and computer firewall and retry. If software show “unable to find equipment”, please reconnect device
Tip information show the latest software version and upgrade information
 Device information show the device SN, device firmware version and the latest firmware version

Firmware upgrade steps:
1. Select the firmware version
2. Click“Start Firmware Upgrade” button
3. Don't close or pull out USB cable before upgrade finished

Software upgrade steps:
1. Click“Software Link 1" or "Software Link 2" button, download software from the web
2. Extract the file

 

Note:
Just as the software update at a high frequency,so that we cancel the CD in the package,sorry for this.But do not worry,we will send you the download link when you place an order,or you can contact me for the newest version,Hope you can understand that!

 

Whatsapp: +86-18033448663
Email: gocardiag@yeah.net
Skype: car.diag1